Mini digger work

Mini digger hire with a driver

For the digging jobs too small, or too tucked away, for a full-size excavator: a trench across a garden, a base for a field shelter, a few stumps by a fence line, or levelling behind the stables. A contractor brings a mini or micro digger and an operator who uses one every day.

The work

What’s involved

A micro digger fits through a garden gate or a doorway-sized gap, and a mini digger through most pedestrian and field gates. Both are light on the ground and turn in their own length, so they work between buildings, along fence lines and across lawns that a bigger machine would ruin.

Typical jobs are trenches for water, drainage and cables, footings and bases for shelters, sheds and walls, digging out stumps and roots, levelling and landscaping, small ponds, and breaking out concrete with a hammer attachment.

Most work is by the hour, half day or day. The contractor will want to know the narrowest way in, what the digging is, and where any spare soil goes, so say all three when you describe the job.

When to do it

A mini digger works all year, and on light tracks it does less damage to wet ground than anything bigger. Even so, a dry spell makes for a neater finish on grass and a cleaner trench.

Book with other trades in mind: a trench is best dug the day the pipe or cable goes in, and footings shortly before the concrete arrives.

Pricing

What affects the price

  • How long the job takes: by the hour, half day or day.
  • Access, and whether only a micro digger will fit.
  • Attachments such as a breaker, auger or grading bucket.
  • What happens to the spoil: spread on site or loaded and taken away.
  • Travel and delivery of the machine to your site.

Good to know

  • Measure the narrowest point on the way in, including gate posts and any step, before you ask. It decides which machine comes.
  • Mark any buried water pipes, cables, drains and septic tank pipes you know about. Old ones are rarely on any plan.
  • If the job grows past a couple of days or needs a deep or wide dig, a full-size excavator may be quicker and cheaper overall.
Common questions

Mini digger work: common questions

Will a mini digger fit through my gate?
A micro digger fits through a gap of about 750mm to 1m, and a typical mini digger needs about 1 to 1.5m. Measure the narrowest point and say so in your description, and the contractor will bring the machine that fits.
Is it better to hire a mini digger with a driver?
For most people, yes. An experienced operator digs faster and neater, knows how to work round buried services, and the machine is their responsibility. Self-drive hire suits only simple jobs if you have used one before.
Will it damage my lawn or paddock?
Rubber tracks spread the weight, so damage on dry ground is light. On wet ground expect some marking where the machine turns, and ask for boards or track mats if the surface matters.
Related work

Often booked alongside

  • Trenching: Trenches dug for pipes, cables and footings, then filled back in.
  • Pipe laying: Water pipe to troughs, land drains and ducts laid underground.
  • Excavator work: Digger and driver for footings, ponds, stumps and spoil.
  • Stump grinding: Tree stumps ground out below ground level, ready to mow or plant.

All services · Paddock maintenance by county